Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they don't rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers that assist the new pane to fit correctly into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor where they could be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap between the door and the window is large, you might want to use an alarm system that has a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC windows can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can get at the frame. After that, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle wears out. It's relatively simple to fix a loose uPVC handle. The first step is to close your window and upvc window repairs do a test fit. The corner joints of the sash need to align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. The leaks of water from windows do can not only cause destruction of your home's structure but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the problem is, the old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A upvc window repair near me specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it blows open with the breeze. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It's easy to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation in the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges, also due to wear and tear can become misaligned, this can cause a gap to form where the sash meets the frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to get them aligned or replaced. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it may be feasible to give them a clean but in certain cases, it may be necessary to get them replaced.

The next common reason for draughts is window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will help to keep cold air out and keep your home warm and upvc window repairs cosy!

With a little maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows will eventually wear out and it could be cheaper to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as possible.