Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't rot or rust like aluminum or timber.

Cleaning and lubricating regularly Upvc Window Repair windows and doors is crucial. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement will generally fit within the frame of the previous one easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this case you'll need find some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

If you're planning to try to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall on the fabric rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your property until a professional arrives to fix the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems that include sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need open the window to access the frame. After that, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for fit. If you're satisfied with the fit of your window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can also be due to the handle mechanism wearing out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and do an experiment fitting. The corner joints of the sash need to align with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on how severe the issue is, the old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze It could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do if you have someone to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. First, the hinges due to wear and tear may become displaced, which can cause an opening to appear where the sash meets the frame. This can be easily fixed by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them realigned or replaced. In addition, upvc window repair the interlock could be unbalanced. This is located on the hinge's side, and might require to be cleaned. In certain instances, it may be necessary to replace these.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and decrease the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric which are filled with a kind of filler. They can be put on top of your windowsill. These will help to keep cold air out and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than fix them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.