Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the old panes. In this case, you will need to find some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a number of problems such as sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need to open the window repairs near me so that you can get to the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it can be due to the handle mechanism getting worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test fit. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, window repairs it's important to take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the problem the old caulking may require removal before a new layer of caulk can be applied. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal rather than the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens in a breeze. They can be easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like any mechanical component, hinges can wear out over time. It's easy to replace a hinge on a window but it's much easier if someone else helps you hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges may also become disaligned as a result of wear, creating gaps between the frame and sash. They can be repaired by giving them thorough clean, however in the event that they are beyond repair it could be necessary to have them realigned or replaced. The interlock may be disaligned. It is located on the hinge's side and may need to be cleaned. In some instances it is possible to replace these.

The next common reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some sort of filler and can be positioned on the windowsill on top. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. However, it is important to recognize that windows last for Window Repairs a certain period of time and they may reach the point when it's more economical to replace them than fix them. If you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as you can.