Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case you'll need locate some plastic spacers that help the new pane to fit properly into the window frame.

If you are going attempt to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the distance between the window and the door is significant, you may want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can access the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loose their elasticity. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have loosened over time, but it could also be caused by the handle mechanism wears out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, upvc window repairs you'll need to close the window and perform a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's crucial to take action. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and reduce your energy efficiency.

Make sure that the drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with ease, it may be the hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to provide suggestions.

It is also important to grease the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges can also be unbalanced due to wear, which can cause an opening where the sash meets frame. They can be fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window, may be misaligned. Again, it is possible to give them a clean but in some instances it could be necessary to have these replaced.

These seals can wear down or UPVC Window Repairs be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window repair window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce draughts.

One of the most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. They can keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it is more cost-effective to simply replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as possible.