Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They don't get rotten or rusty like aluminum or timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is large, you might need to consider a security screen that also includes an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. In time, they could develop a number of problems that include sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll have to open the window to access the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you cannot reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, upvc window Repair leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it can be caused by the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and do a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Based on the severity of the issue the old caulking may need to be removed before a new layer is applied. It is important to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze, it may be hinges that are at fault. They can be repaired by any skilled DIYer and can be completed in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is an easy process but it can be simpler when you have a person to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The problem can be caused due to opening the window in the wrong way or by a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also be disaligned as a result of wear, which can cause an opening between the frame and sash. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it could be necessary to get them realigned or replaced. Second, the interlock can also become disaligned. This is located on the hinge's side, and might require to be cleaned. In some instances it is possible to replace the hinges.

The next common reason for draughts is window seals. They can become worn down or damaged over time, and allow air to escape through these gaps. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen the possibility of draughts.

One of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes filled with some type of filler. They can be put on the top of your windowsill. These will keep your home warm by blocking cold air.

Your windows made of Upvc Window Repair will keep providing excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them than to repair them. If you encounter any issues with your Upvc window you should consult an expert immediately.