Is It Time For Replacement Double Glazed Windows?

Replace your windows to increase your home's energy efficiency. These modern designs are constructed with uPVC or aluminum frames that help insulate your living space, capturing the heat inside.

If you've observed condensation, draughts or leaks around the window frames, it may be time to replace your double-glazed windows. Find a local FENSA approved installer to start.

1. Excessive Condensation

Double glazing is a fantastic method to keep warm inside your home and cut down on the cost of energy. If condensation is excessive and you are not aware of the signs that your windows may need to be replaced. This can lead to a range of problems, such as mildew and mould.

Condensation occurs when warm, humid and humid air comes in contact with the cold surface. You may have seen it in your house when you woke up to find your glasses covered in a film of water or in the outdoors where temperatures dropped below dew point.

In many instances, this is due to internal humidity levels increasing when the outdoor temperature drops. If your home is too warm and you open your windows while you cook or shower it is possible for moisture to build up inside your windows.

External condensation usually forms on the plaster reveals near to the window. It's not as big of an issue as it sounds because the heat of the sun and air movement tends to dry it out quickly. It's worth looking at specialist glass that will prevent the formation of condensation. For example, Pilkington's ActivTM Self-Cleaning Glass, which has a hydrophilic coating that wards off moisture and minimizes condensation.

In the event of internal condensation, if it's between your window panes this indicates that the seal has failed and your window requires replacing. It is also possible that heat is escaping and it's advisable to get a professional to investigate the issue.

2. Wear and tear signs

Your windows don't talk however they attempt to tell you that something is not right. If you're noticing signs like cracks, draughts, and condensation it could be time to consider replacement double glazing.

Modern uPVC windows are designed to offer insulation and reduce your energy costs. They help keep hot air out during summer and prevent the escape of warm air in winter, thereby saving cash on cooling and heating costs. Even energy efficient double-glazed windows will need to be replaced at some point, as their life span is limited.

Condensation is the most frequent sign of worn out double glazed windows. This usually occurs between the two glass surfaces and could be a sign that the seal has failed, or that your windows aren't as efficient as they used to be.

Another sign to look for is if your windows are sweating inside. This is a sign that the temperature of the air in your home is below the dew point. This causes water vapour to condense on the surface of the windows. This can also be caused by the leak or damage to the seal.

It is recommended to hire an professional to replace your windows if they show signs of wear. This is a task which shouldn't be undertaken as a DIY project as it is risky and may result in broken glass. Hire a company who specializes in the installation of double-glazed windows. They will have the proper tools and safety equipment for the task. They will also be able give you suggestions on the most suitable double-glazed windows to fit your home.

3. Unsealed Windows

Double-glazed windows are made of two panes and a spacer between them. This creates an insulating barrier to stop your warm air escaping and cold air from outside getting inside. Contrary to single pane windows double glazed windows offer greater insulation and can drastically cut energy bills by keeping your home warm for a longer period of time.

In a glass window that is sealed, replacement double glazed windows the space in between the two panes is filled with inert gases such as argon xenon or Krypton. These gases impede the transfer of heat within the window, making it more energy efficient and lowering the cost of heating. But with time, the seal between the glass could fail and let air in, which will reduce its insulation properties.

Foggy windows can also be an indication that the seal on your window is in a state of failure and allowing moisture be able to seep through. As the weather changes, fogginess generally disappears. However, you might still feel draughts.

A weak seal around your windows can allow pests such as ants, cockroaches and centipedes enter your home. It also allows pollen and dirt enter your home, which can trigger allergies in the indoors. A solid window seal will also help reduce noise from the street or other sources.

If you are unsure whether your seal is damaged it is essential to get it checked in the earliest time possible. A professional will be able to replace upvc window handle the damaged IGU, and then repair it. The professional will disassemble your window sash, then remove the old IGU unit and replace it with a new one. If the IGU is under warranty, it will be covered by your contractor or the manufacturer. If you do not have a replacement glass for windows, you'll have to put up your windows.

4. Faulty Windows

Double glazed windows are a great option to cut down on energy costs since they let the sun to shine in and also block out noise from outside and help to keep your home warm. However, when they are not working properly, they can lead to condensation and drafts in the house. It is essential to have the windows replaced or repaired as soon as possible to stop damage and leaks from happening.

Condensation is the simplest sign of a double-glazed window that is not sealed properly. The space between two panes begins to develop an unpleasant fog that is not removed from either side. The seal between the glass panes is broken, allowing gasses like argon and Krypton (which are gases) to escape. This results in a moist space in your home.

Another indicator that your windows aren't longer working as they should is an increase in your utility bills. The windows are designed so that warm air can't escape and cold air cannot enter. Any change in your utility bill is a good indicator that it's time to replace your double glazing.

Window problems are usually caused by poor installation. Installing windows requires skill as well as precision and training and is not something homeowners should attempt to do themselves. Poorly installed windows could cause mold growth, water leaks and even leaks. Improper cleaning and care of windows could result in premature failure. This is due to the use of harsh chemicals and power washing that could damage frames, seals and glass. It is best to replace your windows with a reputable business to avoid problems like this and to ensure that they will last for many years.

5. The cost of energy is on the rise

With rising fuel costs continuing to affect households, it's important that homes utilize their energy in a way that is efficient and avoid excessive usage. The windows in a house are an important aspect in the overall energy efficiency of a property. If your energy bills are becoming more expensive, it may be time to have your double glazing checked out and replaced.

Old windows with draughts and leaks can greatly increase the cost of energy. This is because they allow cold air to enter into a home, and may cause heat loss. With a window conversion, and with the latest technology the issues can be resolved and you can enjoy an energy-efficient home all year long.

In winter, double glazed windows help to keep your property warm by trapping in warm air while keeping cold air out. This can decrease your dependence on central heating and make your home more cost-effective.

Double glazing can also be a lifesaver in the summer season, since it keeps heat from getting trapped inside your home. This means that you will depend less on electric heaters and air conditioning and reduce your energy costs and the impact on the environment.

Retrofit double-glazed windows are an excellent option for homeowners who wish to save on their energy costs but don't have the budget to replace all their windows. Installation is faster and uses less material because the existing frame and sash remain intact. This allows the homeowner to choose their preferred style of window but still benefit from the insulation provided by an excellent IGU. The glass can also be filled with argon for greater efficiency in energy use.