Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as timber and aluminum.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and Window Repair improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this instance, you will need to find some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

If you plan to attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any shards will fall on the fabric rather than on the floor where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the distance between the door and the window is large, you might prefer a security screen that also includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues such as sliding. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window which is sagging. First, you'll need to open the windows so you can reach the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it can also be due to the mechanism of the handle wears out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is crucial to take action if you awake each day to discover mouldy walls and wet floors. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the problem is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze It could be hinges that are at fault. They can be replaced by any competent DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung upvc window repairs near me windows that use hinges and like any mechanical part they can wear down over time. Changing a window hinge is an easy process but it can be simpler when you have a person to help hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the Window repair should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges, also due to wear and tear can become misaligned, this causes gaps to develop between the sash and the frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to get them realigned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it may be feasible to give them a clean but in some instances it could be necessary to have them replaced.

The next common reason for draughts is window seals. These are prone to wear or damaged over time and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

Another, Window Repair and most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically made of fabric that are filled with some sort of filler and can be put on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and they may reach an point at which it is more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as you can.