Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. However when you have double glazed window repairs pane windows that are held in place by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap between the door and the window is substantial, you may prefer security screens that includes an opening. This will give you the best of both.

2. Sagging

upvc Window Repair is a long-lasting, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a variety of issues that include sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need to open the window so that you can get to the frame. With an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in place.

If you can't reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism wearing out. It's relatively simple to fix a loose uPVC handle. The first step is to close the window and then perform an initial test fit. The corners of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degradation of your home's structure but also hamper your efforts to regulate the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. This can be done by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The problem can be caused by opening the window improperly or by a poor installation at the factory. This issue can be fixed by sending us a photo on our website. We will be pleased to offer you advice.

Regular lubrication of hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges may also become disaligned as a result of wear, which can cause a gap where the sash and frame meet. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. The interlock may also become disaligned. It is located on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace these.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than repair them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance immediately.