How to Replace a UPVC Window Handle

Don't be concerned when your upvc handle has become broken. Replacing a window handle made of upvc is an easy task and can be completed in just a few steps.

No matter if it's an in-line or a cranked espagnolette window handle they all have an oval spindle protruding out of the back plate. The spindle is fitted into the locking device.

Identify the lock type and handle

Over time windows' handles or locks can become damaged and lose their functionality. The good thing is that this can usually be remedied without replacing the entire window unit made of uPVC. One of the first things to do is determine the type of lock and handle you have because this will help determine what replacement parts you will need.

You can determine the type of handle by looking at its base. There is an anchoring screw or pin that holds the handle to its base. If the screw is not present it could be an indication that the handle has split off from its base. If the handle has split internally and is no longer able to grip the spindle, this could also indicate that it needs replacement.

There are a variety of uPVC handles that are available, but the Espag handle is the most popular. They are usually fixed with two bolts and the spindle is connected to the locking mechanism in the frame of the window. These handles are usually used on uPVC tilt and turn windows.

Another kind of uPVC window handle is the Cockspur handle. They're similar to Espag handles, but have a lower projection from the frame. These handles are generally used on older uPVC windows.

There are also Venetian window handles, which are similar to the Espag handle but they have flat bases that allow them to be positioned flush with the frame. They are an excellent choice for homeowners looking for a stylish, elegant handle that will blend in with their uPVC window frames. They are also available in a large variety of colors to match any style.

Take a measurement of the spindle

Before you purchase a new handle, it's essential to understand how the previous one is attached. This will determine whether it's tight enough or too loose and if it will fit inside the window frame. This can be done by identifying the handle type and measuring the spindle. The spindle is a metal shaft that connects your handle to the lock inside the window frame. The spindle is available in various sizes. The current industry standard is 8mm. Older handles may have a cross-section of 9mm so you'll need to measure your old handle to ensure you get the correct size replacement.

There are many kinds of window handles, however the most common are inline Espagnolette and cockspur handles. They operate with a locking mechanism inside the window with shootbolt rods that secure the window when it is closed. They are secured by pins or screws depending on the type of handle you have.

You can find replacement handles for windows made of upvc online and in a lot of DIY stores. They are available in a variety of finishes and are suitable for both new and replacement windows. They can also be key-locking or fire-escape non-locking for extra security.

To remove the handle open the window and remove the screws that secure it. Be careful not to cause damage to the screws and keep them safe in a container for later use. After the screws have been removed, remove them carefully from the handle. Take a measurement of the distance from the base of the spindle to the tip. This will give you the information you need to buy the right replacement. The spindle of the handle is the metal shaft that connects it to a gearbox for locking in the window frame.

Remove the old handle

Switching a uPVC window handle is a simple task and usually requires less than five minutes with the proper tools. The first thing you need to do is identify the size and type of the handle or lock. This will help you determine the best replacement. After that, weighing the spindle will help ensure that the new handle is a good fit. The old handle will need to be removed and replaced with the new.

The majority of uPVC handles have inline Espagnolette handles. These handles feature an internal spindle that slots into the locking mechanism of the window. They are usually simple to remove, but they might require force if get stuck. There are typically two screws that hold the handle in place which can be removed with a screwdriver or pliers. Depending on the kind of handle, you may be required to take out the pins that hold it in place.

After you have removed the screws, you can remove the handle you were using previously. When the handle is opened the top of the baseplate should be visible. This will reveal two additional screws that can be removed. There's also small silver or another color sticker that must be removed if it's in place.

With the screws that came off the handle, you are now able to put the new handle in place. Make sure that the screw holes are aligned on the window with the holes in the handle. Once you've completed this then replace the caps on the screws. Test the new handle. It's easy to change a uPVC handle, but you need to make it right.

Install the new handle

It's time to put in your new handle if you have successfully removed the old one from the frame. Start by locating and removing the screws with your screwdriver. Once the screw covers have been removed, store them in a safe place before moving on to the next step.

Then screw the spindle into by aligning it with the hole that is already in place. Be sure to align the holes in the handle with the holes in the window frame. Also, use a screw cost of windows replacement the same length as those used previously, or it could result in the handle not being secure.

The uPVC Espag handle is equipped with a spindle that is 7mm square that rotates the lock mechanism of the window. This kind of handle can be commonly found in modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) feature long noses that lock over the frame's outer edge or transom bar cross member. They are commonly found in older uPVC windows.

Once the new handle has been put installed, it's crucial to test that it works properly by locking and unlocking the window several times. If everything goes according the plan, the new uPVC handle should be securely fixed and operating smoothly. If not, the above steps will help you diagnose any problems and resolve it quickly. If you're having trouble with your uPVC handle or are experiencing other glazed home improvement issues do not hesitate to contact us at Bridgewater Glass replacement In windows for professional assistance. Our glaziers are certified to repair or replace windows with a variety of frames and handles which makes us a great option for your double glazing needs.

Test the new handle

Over time, uPVC handles be damaged and worn out. It can make them less secure and effective and therefore it is essential to replace them immediately. It's also an ideal idea to do this after you upgrade your windows, because changing the handle and lock will ensure the security of your new windows.

When it comes to uPVC window handles, there are a number of different styles. Some are fixed by pins or screws, while others have blades that slide into the lock mechanism. Each type has its own method of replacement window handle, and it's crucial to know what type you have before you start working on it.

Espag window handles are the most popular type, and they're typically used on newer uPVC windows. These handles have spindles that extend from the handle and goes into the gearbox of the lock, and when you open the window, it triggers the locking mechanism. These handles are also easy to take off. However, you must be careful not to harm either the mechanism or the handle.

Cockspur window handles are another popular option for uPVC windows. They're held by a spur that is snagged onto the striker plate in the shape of a wedge on the frame, and when you close or tilt the window, it engages the locking mechanism. This kind of handle is more difficult to repair than other types, but it's still an excellent choice for the majority of homes.

Venetian window handles are secured by two bolts and feature an elongated projection from the frame, which is not the case with the Espag handle. These handles are ideal for those who want to have a flush handle that blends into uPVC window frames. They're a great choice for residential and commercial properties.